Are you facing a hitron router flashing green light issue? No worries! You are at the right place to explore the green LED on your networking device whether it is normal or depicting as an issue. In addition, we shed light on the multiple phases of flashing green light on the router and easy troubleshooting tips to resolve it.
Understanding the hitron router blinking green LED phases
In addition, before you consider the flashing green as a concern, must understand the normal behavior of the blinking green LED on your Hitron gateway, have a look:
Downstream/Upstream
When the router is looking for the downstream or upstream frequency on the cable connection, the Downstream/Upstream LED flashes green.
LAN Port LED
If a smart device is placed on the Hitron router connected to the LAN Port and data that is being transferred through it then the LAN Port light also blinks green.
Wireless/Wifi
While the WiFi network is also active (2.4Ghz / 5Ghz) and transmits data the Wireless LED is flickering green.
USB LED
When a USB is connected to the Hitron gateway or data is sent through it, then the flashlight of a USB is glowing green.
The green light on the Hitron router as an error
In general, if the LEDs on the Hitron blink green stay for longer, then this may be an issue. So, we shed light on the primary causes behind the hitron router blinking green continuously. Let’s have a look:
- Unstable network/Poor signals
- ISP issues
- Network interferences
- Cable connection issues
- Router overheating
- Technical glitches and bugs
How to fix the hitron router flashing green issue?
Moreover, you now understand the common appearance of hitron router blinking green light including its abnormal behavior as an issue. Apart from that, it is essential to resolve this problem timely for optimal router performance. In addition, we are sharing the quick fixes in this section that would help you fix this issue, take a look beneath:
- Ensure that the wireless network you use is stable or use the ethernet cable to stabilize it.
- Now, check that the cables you connect are linked to the right ports and connections are tightened enough.
- Look that the power/network cables are not tangled or damaged. If you find any then replace it immediately.
- Place the router in a central location in a ventilated area.
- Remove the signal interferers such as mirrors, microwaves, furniture, etc. around the networking device.
- If the network keeps disconnecting and signal strength is poor, then you need to approach the ISP authority. They will provide you with the suitable guidelines.
- Power cycle the Hitron router to remove the technical glitches and bugs. This will also enhance the router’s speed and fix the hitron router flashing green.
- To eradicate the network connectivity issues, disconnect the unused smart devices from the router.
- Clean the LAN/RJ/Ethernet ports on the router with the help of a softer cloth or brush by turning it off.
- If you’re using a separate modem with the Hitron router, ensure they are perfectly connected. In a case where you are using the router with an inbuilt modem, then ensure sufficient power supply to it.
- If any of the above methods cannot resolve the green light problems, perform a factory reset on your Hitron router. This will revert your network device to its default settings.
In a nutshell, this brief post will provide deep insights into the Hitron Router Flashing Green issue. Here, you find the common phases for the green LED and the causes for the persistent green light issue among effective fixes to resolve it.